Differences

This shows you the differences between two versions of the page.

--- electrical:12v:battery_monitor [2020/04/15 23:57]
frater_secessus [Battery monitors]
+++ electrical:12v:battery_monitor [2020/04/15 23:59]
frater_secessus [Battery monitors]
@@ Line 10: / Line 10: @@
   * a calculation on capacity used/remaining
-For the monitor to keep accurate count, power **from all charging sources** and **to all loads** must pass through its //shunt//, a relatively heavy piece of metal that reacts predictably to current. Typically the shunt is placed between the battery bank's negative post and the "ground".((negative side of the circuit))  The monitor display is mounted remotely where it is convenient to view.
+For the monitor to keep accurate count, power **from all charging sources** and **to all loads** must pass through its //shunt//, a relatively heavy piece of metal that reacts predictably to current. Typically the shunt is placed between the battery bank's negative post and the systems's "ground".((negative/return side of the circuit))  The monitor display is mounted remotely where it is convenient to view.
 ===== how they work =====

RV and vandwellers wiki