User Tools

Site Tools


electrical:12v:eternal_absorption

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision Both sides next revision
electrical:12v:eternal_absorption [2020/07/08 12:08]
frater_secessus created
electrical:12v:eternal_absorption [2020/07/08 12:08]
frater_secessus [insufficient Absorption]
Line 1: Line 1:
 Note:  this is for deep cycle lead chemistries only.!  Lithium chemistries should not be held at full voltage.  Note:  this is for deep cycle lead chemistries only.!  Lithium chemistries should not be held at full voltage. 
  
-====== insufficient Absorption ======+====== dealing with insufficient Absorption ======
  
 In off-grid solar charging scenarios batteries are most often damaged by [[electrical:batterycide|chronic undercharging]].  Specifically, not holding the [[electrical:solar:charge_controller_setpoints|manufacturer's recomended Absorption voltage]] (Vabs), and not holding that voltage long enough((duration)) for acceptance to drop to endAmps. In off-grid solar charging scenarios batteries are most often damaged by [[electrical:batterycide|chronic undercharging]].  Specifically, not holding the [[electrical:solar:charge_controller_setpoints|manufacturer's recomended Absorption voltage]] (Vabs), and not holding that voltage long enough((duration)) for acceptance to drop to endAmps.
electrical/12v/eternal_absorption.txt ยท Last modified: 2021/05/05 11:04 by frater_secessus