User Tools

Site Tools


electrical:solar:output

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
electrical:solar:output [2021/08/11 17:18]
frater_secessus [Factors affecting solar panel output]
electrical:solar:output [2022/02/23 13:18]
frater_secessus [solar magnifiers]
Line 78: Line 78:
     * altitude (total irradiance ~+2.67%/1000')((https://www.sciencedirect.com/science/article/abs/pii/S1011134496000188))     * altitude (total irradiance ~+2.67%/1000')((https://www.sciencedirect.com/science/article/abs/pii/S1011134496000188))
     * humidity((https://www.researchgate.net/publication/338412686_Performance_study_of_Monocrystalline_and_Polycrystalline_solar_PV_modules_in_tropical_environments))     * humidity((https://www.researchgate.net/publication/338412686_Performance_study_of_Monocrystalline_and_Polycrystalline_solar_PV_modules_in_tropical_environments))
 +
 +Even the altitude and type of clouds can affect harvest:
 +
 +> in addition to total sky cover, cloud type is a significant factor in determining the reduction in solar radiation. In particular high, thin cirriform clouds are significantly less effective in reducing solar radiation than are lower, thicker clouds.((https://www.osti.gov/servlets/purl/6835171))
  
  
Line 142: Line 146:
 ===== solar magnifiers ===== ===== solar magnifiers =====
  
-Some conditions can cause an effective magnification of solar power, the opposite of shade in a way.  This is usually caused by reflection of previously-uncaptured light onto the panels -- the panels are receiving both normal //direct// light and the additional //reflected// light at the same time. Since panels are rated at a lab standard 1000w/meter<sup>2</sup> , this multiplication of available light can cause the panels to make more than their rated power, and can cause Voc to rise beyond rated specs.  +{{ https://sky-lights.org/wp-content/uploads/2020/04/2020-04-20-S4.jpg?150|https://sky-lights.org/2020/04/20/cloud-edge-effects-on-solar-arrays/}} 
 +Some conditions can cause an effective magnification of solar power, the opposite of shade in a way.  This is usually caused by reflection of previously-uncaptured light onto the panels -- the panels are receiving both normal //direct// light and the additional //reflected// light at the same time. Since panels are rated at a lab standard 1000w/meter<sup>2</sup> , this multiplication of available light can cause the panels to make more than their rated power, and can cause current and/or voltage to rise beyond rated specs.  
  
 Examples: Examples:
electrical/solar/output.txt · Last modified: 2024/05/28 19:01 by frater_secessus