User Tools

Site Tools


electrical:solar:output

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
electrical:solar:output [2022/02/23 13:14]
frater_secessus [solar magnifiers]
electrical:solar:output [2022/04/05 19:32]
frater_secessus [Factors affecting solar panel output]
Line 4: Line 4:
 ====== Factors affecting solar panel output ====== ====== Factors affecting solar panel output ======
  
-For various reasons **it will be a rare event when your panels put out their full rated power**.  One reason for this is **the power needs somewhere to go**;  unless you are in [[electrical:12v:charging#bulk_stage|Bulk stage]] or are running big loads //the power isn't needed// so //the power isn't generated//.  +For various reasons **it will be a rare event when your panels put out their full rated power**.  One reason for this is **the power needs somewhere to go**;  unless you are in [[electrical:12v:charging#bulk_stage|Bulk stage]] or are running big loads //full power isn't needed// so //full power isn't generated//.  
  
 The other big reason is that **power ratings are derived from testing under specific lab conditions**.((STC - Standard Testing Conditions))  The standard lab test is at: The other big reason is that **power ratings are derived from testing under specific lab conditions**.((STC - Standard Testing Conditions))  The standard lab test is at:
Line 146: Line 146:
 ===== solar magnifiers ===== ===== solar magnifiers =====
  
-{{ https://sky-lights.org/wp-content/uploads/2020/04/2020-04-20-S4.jpg?150}}+{{ https://sky-lights.org/wp-content/uploads/2020/04/2020-04-20-S4.jpg?150|https://sky-lights.org/2020/04/20/cloud-edge-effects-on-solar-arrays/}}
 Some conditions can cause an effective magnification of solar power, the opposite of shade in a way.  This is usually caused by reflection of previously-uncaptured light onto the panels -- the panels are receiving both normal //direct// light and the additional //reflected// light at the same time. Since panels are rated at a lab standard 1000w/meter<sup>2</sup> , this multiplication of available light can cause the panels to make more than their rated power, and can cause current and/or voltage to rise beyond rated specs.   Some conditions can cause an effective magnification of solar power, the opposite of shade in a way.  This is usually caused by reflection of previously-uncaptured light onto the panels -- the panels are receiving both normal //direct// light and the additional //reflected// light at the same time. Since panels are rated at a lab standard 1000w/meter<sup>2</sup> , this multiplication of available light can cause the panels to make more than their rated power, and can cause current and/or voltage to rise beyond rated specs.  
  
Line 187: Line 187:
  
  
 +Further reading:
  
 +  * [[https://www.gonewiththewynns.com/tilt-rv-solar-panels|results of tilt expermiments]] by Gone With the Wynnes
 ===== cleanliness ===== ===== cleanliness =====
  
electrical/solar/output.txt ยท Last modified: 2024/05/28 19:01 by frater_secessus