User Tools

Site Tools


electrical:solar:output

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:output [2022/10/19 10:34]
frater_secessus [lack of demand]
electrical:solar:output [2022/10/19 10:47]
frater_secessus [charge controller type]
Line 27: Line 27:
 [[electrical:solar:charge_controller#mppt|MPPT]] controllers can run the panel at max output when needed, but are much more expensive.  [[electrical:solar:charge_controller#mppt|MPPT]] controllers can run the panel at max output when needed, but are much more expensive. 
  
 +===== overpaneling =====
 +
 +Perhaps counterintuitively, setups with [[electrical:solar:overpaneling#vs_charge_controller|ample panel]] may see lower peak outputs than smaller setups.  This occurs because the overpaneled systems can get the bank charged before local solar noon when maximal harvest can be observed.  This is a feature, not a bug.  Overpaneled systems are built to meet needs under less-than-optimal conditions.  If you want to see tBig Numbers, start a huge load at local solar noon under good solar conditions. 
 ===== wiring losses ===== ===== wiring losses =====
  
electrical/solar/output.txt ยท Last modified: 2024/05/28 19:01 by frater_secessus