User Tools

Site Tools


electrical:solar:panels

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:panels [2023/05/04 20:06]
frater_secessus [Panel voltage]
electrical:solar:panels [2023/07/12 11:17]
frater_secessus [Solar panels]
Line 5: Line 5:
 To avoid overcharging,((a bit of an oversimplification, admittedly)) a [[electrical:solar:charge controller|charge controller]] is placed between the PV and the battery bank. To avoid overcharging,((a bit of an oversimplification, admittedly)) a [[electrical:solar:charge controller|charge controller]] is placed between the PV and the battery bank.
  
-[[electrical:solar:output|Many factors]] will affect output; and panels will rarely generate power equal to their laboratory rating. +[[electrical:solar:output|Many factors]] will affect output; and panels will rarely generate power equal to their laboratory rating.  As a general rule, expect panels to put out much less than their rated wattage under normal conditions 
- +
-**As a general rule, expect panels to put out 60% of their rating** under absolutely best-case scenarios.+
  
 There are several types of PV widely available on the market, and many more in research stages.  PV are described by how each panel's cells are constructed. There are several types of PV widely available on the market, and many more in research stages.  PV are described by how each panel's cells are constructed.
electrical/solar/panels.txt · Last modified: 2024/05/28 22:01 by frater_secessus