User Tools

Site Tools


electrical:solar:pwm_tweaking

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:pwm_tweaking [2018/04/18 16:50]
frater_secessus [Tweaking a PWM controller for maximum power]
electrical:solar:pwm_tweaking [2018/04/18 16:52]
frater_secessus [the controller's achilles heel]
Line 26: Line 26:
 12.1v x 5.6A = 67.76W <-- power at 50% state of charge;  bulk charging 12.1v x 5.6A = 67.76W <-- power at 50% state of charge;  bulk charging
  
-This last number shows how far off PWM output can fall when battery voltage is at its lowest.((The last number is also the source of the "30% boost!!!" claims some MPPT makers make.  Yes, at that point MPPT at 94.69w (after 5% MPPT efficiency penalty) is 40.2% more than PWM's 67.76w but that is when the disparity is the widest.  Most of the time the MPPT charging advantage is lower, perhaps 15%.))  It's also when the battery needs the most current to get out of that deep cycle trough.  +This last number shows how far off PWM output can fall when battery voltage (Vbatt) is at its lowest.((The last number is also the source of the "30% boost!!!" claims some MPPT makers make.  Yes, at that point MPPT at 94.69w (after 5% MPPT efficiency penalty) is 40.2% more than PWM's 67.76w but that is when the disparity is the widest.  Most of the time the MPPT charging advantage is lower, perhaps 15%.))  It's also when the battery needs the most current to get out of that deep cycle trough.  
  
 ===== the plan ===== ===== the plan =====
electrical/solar/pwm_tweaking.txt ยท Last modified: 2023/11/19 16:18 by frater_secessus