User Tools

Site Tools


electrical:solar:status

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
electrical:solar:status [2022/08/09 12:11]
frater_secessus [in absorption]
electrical:solar:status [2023/07/13 18:44]
frater_secessus [sudden voltage spikes]
Line 81: Line 81:
  
  
-**During [[electrical:12v:charging#absorption#absorption_stage|Absorption]] charging** lead-acid batteries will need less and less current.+**During [[electrical:12v:charging#absorption#absorption_stage|Absorption]] charging** batteries will need less and less current.
  
 **with MPPT controllers** **with MPPT controllers**
Line 182: Line 182:
  
  
 +===== sudden voltage spikes =====
  
 +If you are seeing sudden voltage spikes and have lithium batteries, you may be seeing [[opinion:frater_secessus:lifepo4_charging_voltage|the BMS disconnect charging]].
  
 +===== MPPT tracking sweeps =====
  
  
 +An **MPPT** controller sweeps the **P**ower **P**oints along the array voltage curve in order to **T**rack the **M**aximum (and non-maxiumum) power points.  
 +
 +Depending on the algorithm the sweep may be local to the present Vpanel, or may be a sweep from 0v-Voc, or anything in between.  It may happen often or seldem.  
 +
 +The sweep will interfere with power production so the mfg attempts to find a balance between
 +
 +  * constant production, and
 +  * learning whether or not one is operating at the ideal power poing
  
  
electrical/solar/status.txt ยท Last modified: 2024/01/14 15:32 by frater_secessus