RVwiki for vanfolk and others who live in vehicles

User Tools

Site Tools

Trace: • electrical_notation
electrical:12v:electrical_notation

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
electrical:12v:electrical_notation [2017/05/26 23:58]
frater_secessus format 		electrical:12v:electrical_notation [2020/10/11 23:48] (current)
Line 1: Line 1:
-====== Electrical notation ======+====== Electrical terms often seen with solar ======
  
  
   * **I** - current in Amps.  The //I// comes from the archaic term //intensity//.   * **I** - current in Amps.  The //I// comes from the archaic term //intensity//.
 +  * **Imp** current at the panel's maximum power output (see Vmp)
   * **Isc** - Amps when short circuited;  this is when your [[electrical:solar:panels|solar panels]] are connected only to themselves.  This is the highest current your panels can theoretically produce.   * **Isc** - Amps when short circuited;  this is when your [[electrical:solar:panels|solar panels]] are connected only to themselves.  This is the highest current your panels can theoretically produce.
 +  * **Pmax** maximum power a panel will make.  Vmp * Imp = Pmax
 +  * **[[electrical:solar:charge_controller_setpoints|Setpoint]]** - a value used to place a limit or border on a particular operation.  If your refrigerator is set hold 40F temperatures then //40F is the setpoint//.  If your charger floats at 13.2v then //13.2v is the Vfloat setpoint//.  Setpoints may be preset by the manufacturer or configured by the user. 
   * **V** - Volts   * **V** - Volts
-  * **Vabs** - charge controller voltage setpoint for Absorption stage +  * **Vabs** - [[electrical:solar:charge_controller|charge controller]] voltage setpoint for [[electrical:12v:charging#absorption_stage|Absorption stage]] 
-  * **Vfloat** - charge controller voltage setpoint for Float stage+  * Vbatt - actual voltage of the battery bank. 
 +  * **Vfloat** - charge controller voltage setpoint for [[electrical:12v:charging#float_stage|Float stage]] 
 +  * **Vmp** - voltage at which a panel makes **m**axiumum **p**ower (watts)
   * **Voc** - volts in open circuit; when your [[electrical:solar:panels|solar panels]] are not connected to anything.  This is the highest voltage your panels can theoretically produce.   * **Voc** - volts in open circuit; when your [[electrical:solar:panels|solar panels]] are not connected to anything.  This is the highest voltage your panels can theoretically produce.
 +  * **Vpanel** - voltage the controller is running the panel[s] at
   * **W** - power in Watts   * **W** - power in Watts
electrical/12v/electrical_notation.1495843127.txt.gz · Last modified: 2020/10/11 23:48 (external edit)

Page Tools

affilliate disclosure | the RVwiki runs on a virtual server from NetCup

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki