Differences

This shows you the differences between two versions of the page.

--- electrical:12v:lvd [2021/10/04 12:30]
frater_secessus [Low Voltage Disconnect (LVD)]
+++ electrical:12v:lvd [2024/11/04 11:02] (current)
frater_secessus [challenges] added yt video
@@ Line 2: / Line 2: @@
 A low voltage disconnect is used to stop loads from dragging a battery bank below a given voltage (Vlvd).
+===== examples =====
+[[https://amzn.to/3Ri94RY|{{ https://m.media-amazon.com/images/I/51ODnDvz-rL._AC_UL400_.jpg?125}}]]
+  * [[https://amzn.to/3Ri94RY|Victron Battery Protect]]
+  * [[https://amzn.to/47Xzz5n|Blue Sea 7635 m-LVD]]
+  * [[https://www.amazon.com/s?k=low+voltage+disconnect&link_code=qs&tag=themousepad|various amazon listings]]
+One can also **DIY a low voltage disconnect**.
 In theory the simplest way to implement an LVD would be to wire all loads go through the [[electrical:solar:charge_controller#using_load_output|LOAD output]] of the charge controller, and set the controller's [[electrical:solar:charge_controller_setpoints|Vlvd]].  In practice this is rarely done for reasons given in the link above.  It is more common to run a [[electrical:12v:relay|relay]] on the LOAD output, which is triggered ON/OFF by the LVD setting:
@@ Line 45: / Line 56: @@
 Observe and adjust based on your experience with your own system.
+===== further reading =====
+  * [[https://www.youtube.com/watch?v=cFUcXOznENQ|quick demonstration]] of a generic LVD

RV and vandwellers wiki