User Tools

Site Tools


electrical:12v:voltage_sag

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electrical:12v:voltage_sag [2025/10/28 14:31]
frater_secessus [calibration]
electrical:12v:voltage_sag [2025/11/08 16:32] (current)
frater_secessus [TL;DR]
Line 1: Line 1:
 ====== Voltage sag ====== ====== Voltage sag ======
 +
 +
 +===== TL;DR =====
 +
 +  * resistance in the circuit causes apparent voltage to **sag when discharging**
 +  * likewise, resistance causes apparent voltage to **rise when charging**
 +  * some sag/rise is normal. Circuits with excess resistance (undersized wiring, iffy connections) can cause apparent voltage to deviate enough to affect system performance
 +  * voltage sensing can correct for sag/rise (within limits)
 +  * [[https://www.bluesea.com/resources/1437|Blue Sea's documentation]] provides guidance on designing circuits with acceptable levels of voltage sag.
 +  * sag is a function of [[https://en.wikipedia.org/wiki/Ohm%27s_law|Ohm's Law]]((in ''V=IxR'' form))
 +
 +
 +[[opinion:frater_secessus:pareto|about these summaries]]
 +
 +===== overview =====
 +
  
 [Note:  this article is written from the standpoint of the [[electrical:solar:charge_controller|solar charge controller]].  It affects all circuits to some degree and is not limited to solar. -- secessus] [Note:  this article is written from the standpoint of the [[electrical:solar:charge_controller|solar charge controller]].  It affects all circuits to some degree and is not limited to solar. -- secessus]
electrical/12v/voltage_sag.1761661870.txt.gz · Last modified: 2025/10/28 14:31 by frater_secessus