This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
electrical:solar:series_vs_parallel [2021/06/06 19:28] frater_secessus [Series-Parallel] |
electrical:solar:series_vs_parallel [2025/04/17 14:56] (current) frater_secessus [Series] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Series and Parallel solar arrays ====== | ====== Series and Parallel solar arrays ====== | ||
| - | Generally speaking, parallel arrays of nominal 12v [[electrical: | + | ===== TL;DR ===== |
| + | |||
| + | * With [[electrical: | ||
| + | * [[electrical: | ||
| + | * //generally speaking//, parallel panels will perform better in [[electrical: | ||
| + | * as with other [[electrical: | ||
| + | * series arrays can reduce capital costs in some circumstances | ||
| + | * series/ | ||
| + | * 2 panels in parallel would be 2P1S | ||
| + | * 2 panels in series would be 1P2S | ||
| + | * 4 panels in series-parallel would be 2P2S | ||
| Line 11: | Line 21: | ||
| * higher PV voltage can run in relatively **thinner wires** to the charge controller | * higher PV voltage can run in relatively **thinner wires** to the charge controller | ||
| * serial connections can provide **some charging in low light situations** where lower voltage parallel or single-panel connections might not. Imagine two nominal 12v panels running at 11v at sunrise; | * serial connections can provide **some charging in low light situations** where lower voltage parallel or single-panel connections might not. Imagine two nominal 12v panels running at 11v at sunrise; | ||
| - | * higher-voltage serial configurations with MPPT controllers may provide [[electrical: | + | * higher-voltage serial configurations with MPPT controllers may provide [[electrical: |
| * higher voltages **work well with MPPT controllers** | * higher voltages **work well with MPPT controllers** | ||
| * higher voltages can **charge higher voltage battery systems** like 24v. | * higher voltages can **charge higher voltage battery systems** like 24v. | ||
| Line 58: | Line 68: | ||
| A compromise might be series-parallel array (2p2s) with 45.6Voc and ~16A. This would require 1x 2-into-1 MC4 adapter to combine the two serial strings. | A compromise might be series-parallel array (2p2s) with 45.6Voc and ~16A. This would require 1x 2-into-1 MC4 adapter to combine the two serial strings. | ||
| + | ===== further reading ===== | ||
| + | |||
| + | * [[https:// | ||
| + | * [[https:// | ||
| + | * [[https:// | ||