opinion:frater_secessus:charging_faster
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
opinion:frater_secessus:charging_faster [2020/11/17 14:23] frater_secessus [lithium] |
opinion:frater_secessus:charging_faster [2023/07/15 11:05] (current) frater_secessus [lithium] |
| |
| |
**Lithium batteries** can slurp up current wildly, but shouldn't for their own health. Lithium lasts longest in sub-C use (ie, less than 100A for a 100Ah Li bank). C/2 (50A) is a more common limit to keep from stressing them. In commercial examples the BMS will limit current to protect the cells. A small [[electrical:12v:b2b|DC-DC charger]] can help protect bare cells from their own greediness. | **Lithium batteries** can slurp up current wildly, but shouldn't for their own health. Lithium lasts longest in sub-C use (ie, less than 100A for a 100Ah Li bank). 0.5C (50A) is a more common manufacturer recommendation, and folks [[electrical:12v:drop-in_lifepo4#an_approach_to_greater_longevity|striving for added longevity]] might limit it to 0.2C (20A). There is some evidence that 0.4C rates are acceptable for long life when combined with gentle charging voltages like 3.45Vpc.((FIXME - insert Rod's testing of 2011 bank here)) |
| |
| In commercial examples the BMS will limit current (typically to 1C) to protect the cells. A small [[electrical:12v:b2b|DC-DC charger]] can help protect bare cells from their own greediness. |
| |
| |
Limiting charging current also makes it easier on alternators when they are used to charge Li. | Limiting charging current also makes it easier on alternators when they are used to charge Li. |
opinion/frater_secessus/charging_faster.1605641031.txt.gz ยท Last modified: 2020/11/17 14:23 by frater_secessus