This is an old revision of the document!
return to the solar harvest article or insolation subsection
You can use PVWatts to find solar harvest estimates for a particular place, month, array size, etc. You can use this info to
- find out how much power your
We need to make a couple changes here
The first column is kWh/square meter/day, AKA Hours of Full Sun Equivalent (FSE).
The second column is kWh harvested per month. To find average maximal harvest per day divide this figure by the number of days in that month.
Example: In January in this location the system could make 17kWh. 17 divided by 31 days = 0.548kWh/day, (548Wh/day).
Note: the 2nd column is rounded to whole numbers. This makes little difference with large residential installs but can distort the result with our small systems. You can use the FSE number to do the math for your setup directly:
FSE x array wattage x ((100 - system losses) / 100)
…which gives a more precise 605Wh/day. You may want to plug that formula into a spreadsheet for easy re-use.The system losses will be 14.08 or 30.0 as above, depending on the controller.
Wh required / "Solar Radiation" / overall system efficiency
You need 900Wh/day. You live in Stuttgart, Germany and the lowest FSE in a month you will be camping is 2.37 hours of FSE in October. You have an MPPT solar charge controller.
So 900Wh / 2.37 / 0.85 = 446.76w of flat-mounted panel.