User Tools

Site Tools


electrical:12v:battery_capacity

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:12v:battery_capacity [2017/08/25 18:12]
frater_secessus [Examples]
electrical:12v:battery_capacity [2017/08/25 18:12] (current)
frater_secessus [Examples]
Line 17: Line 17:
 If the manufacturer recommends max //​discharge//​ (load) be 3C the rate should be at or below 600A (3x200). \\  If the manufacturer recommends max //​discharge//​ (load) be 3C the rate should be at or below 600A (3x200). \\ 
  
-If the manufacturers ​says that [[electrical:​12v:​charging|Absorption stage]] is complete when charging current has dropped to C/100 or C/200 then the current to watch for would be 2A (200/100) or 1A (200/200).+If the manufacturer ​says that [[electrical:​12v:​charging|Absorption stage]] is complete when charging current has dropped to C/100 or C/200 then the current to watch for would be 2A (200/100) or 1A (200/200).
  
  
electrical/12v/battery_capacity.txt ยท Last modified: 2017/08/25 18:12 by frater_secessus