Differences

This shows you the differences between two versions of the page.

--- electrical:12v:charging [2019/04/11 19:50]
frater_secessus [charge-and-stop]
+++ electrical:12v:charging [2019/04/11 19:54]
frater_secessus [charge-and-stop]
@@ Line 64: / Line 64: @@
   - repeat
+**This differs from PWM** because PWM can hold an average voltage by cutting power hundreds or thousands of times a second.  If you make a setpoint for 13.6v it will hold 13.6v as long as sun and [[electrical:12v:loads|loads]] cooperate.  A shunt programmed to charge to disconnect at 13.6v and reconnect at 12.7v will average 13.05v.
 These setpoints may or may not be user-configurable.

RV and vandwellers wiki