electrical:12v:directcharginglfp
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
electrical:12v:directcharginglfp [2022/11/05 12:31] frater_secessus [current drawn expressed as C-rate] |
electrical:12v:directcharginglfp [2023/01/10 11:21] frater_secessus [Isolator charging LiFePO4 banks] |
| |
| |
====== Isolator charging LiFePO4 banks ====== | ====== Direct charging LiFePO4 banks ====== |
| |
There is an [[electrical:12v:drop-in_lifepo4#mythyou_must_use_dc-dc_for_alternator_charging_li|often-repeated claim]] that LiFePO4 house banks will pull always monstrous levels of current and destroy alternators if a plain [[electrical:12v:alternator|isolator]] is used instead of a [[electrical:12v:b2b|DC-DC charger]]. This claim is not supported by empirical testing. The data below provide **actual measurements** to help people make informed decisions. We will see that **current demand by LFP banks follows a known formula** rather than the opinions of people on the internet. | There is an [[electrical:12v:drop-in_lifepo4#mythyou_must_use_dc-dc_for_alternator_charging_li|often-repeated claim]] that LiFePO4 house banks will pull always monstrous levels of current and destroy alternators if a plain [[electrical:12v:alternator|isolator]] is used instead of a [[electrical:12v:b2b|DC-DC charger]]. This claim is not supported by empirical testing. The data below provide **actual measurements** to help people make informed decisions. We will see that **current demand by LFP banks follows a known formula** rather than the opinions of people on the internet. |
electrical/12v/directcharginglfp.txt ยท Last modified: 2024/04/04 11:51 by frater_secessus