electrical:12v:electrical_notation
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
electrical:12v:electrical_notation [2020/05/11 19:21] frater_secessus |
electrical:12v:electrical_notation [2020/05/11 19:21] frater_secessus |
* **I** - current in Amps. The //I// comes from the archaic term //intensity//. | * **I** - current in Amps. The //I// comes from the archaic term //intensity//. |
* **Isc** - Amps when short circuited; this is when your [[electrical:solar:panels|solar panels]] are connected only to themselves. This is the highest current your panels can theoretically produce. | * **Isc** - Amps when short circuited; this is when your [[electrical:solar:panels|solar panels]] are connected only to themselves. This is the highest current your panels can theoretically produce. |
* **Setpoint** - a value used to place a limit or border on a particular operation. If your refrigerator is set hold 40F temperatures then //40F is the setpoint//. If your charger floats at 13.2v then //13.2v is the Vfloat setpoint//. Setpoints may be preset by the manufacturer or configured by the user. | * **[[electrical:solar:charge_controller_setpoints|Setpoint]]** - a value used to place a limit or border on a particular operation. If your refrigerator is set hold 40F temperatures then //40F is the setpoint//. If your charger floats at 13.2v then //13.2v is the Vfloat setpoint//. Setpoints may be preset by the manufacturer or configured by the user. |
* **V** - Volts | * **V** - Volts |
* **Vabs** - [[electrical:solar:charge_controller|charge controller]] voltage setpoint for [[electrical:12v:charging#absorption_stage|Absorption stage]] | * **Vabs** - [[electrical:solar:charge_controller|charge controller]] voltage setpoint for [[electrical:12v:charging#absorption_stage|Absorption stage]] |
electrical/12v/electrical_notation.txt ยท Last modified: 2020/10/11 19:48 (external edit)