electrical:12v:multipoint_charging
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
electrical:12v:multipoint_charging [2018/08/26 10:01] frater_secessus [concurrent charging] |
electrical:12v:multipoint_charging [2018/08/26 10:03] frater_secessus [why one source wins] |
Most charging involves holding((or trying to reach)) a particular voltage [[electrical:12v:electrical_notation|setpoint]].((current-terminated Absorption excepted for purposes of this discussion)) If a charging source sees the bank voltage is above its own setpoint it thinks the job is done; it sits quietly. | Most charging involves holding((or trying to reach)) a particular voltage [[electrical:12v:electrical_notation|setpoint]].((current-terminated Absorption excepted for purposes of this discussion)) If a charging source sees the bank voltage is above its own setpoint it thinks the job is done; it sits quietly. |
| |
Example. Pretend you have a bank in a van with [[electrical:12v:alternator|alternator charging]] and a large and small [[electrical:solar:panels|solar panel]] on the roof. Each panel has a dedicated [[electrical:solar:charge_controller|charge controller]] because the panels are of wildly different specs. This gives us three charging sources if you are driving down the road at dawn. | Example. Pretend you have a bank in a van with [[electrical:12v:alternator|alternator charging]] and two [[electrical:solar:panels|solar panels]] on the roof. Each panel has a dedicated [[electrical:solar:charge_controller|charge controller]] because the panels are of wildly different specs. This gives us three charging sources if you are driving down the road at dawn. |
| |
The alternator is just a plain alternator and puts out 14.0v all the time. | The alternator is just a plain alternator and puts out 14.0v all the time. |
electrical/12v/multipoint_charging.txt ยท Last modified: 2024/03/29 18:55 by frater_secessus