User Tools
electrical:12v:multipoint_charging
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
electrical:12v:multipoint_charging [2020/03/18 13:45] frater_secessus [why one source wins] |
electrical:12v:multipoint_charging [2020/05/11 17:44] frater_secessus [why one source wins] |
||
|---|---|---|---|
| Line 23: | Line 23: | ||
| The alternator is just a plain alternator and puts out 14.0v all the time. | The alternator is just a plain alternator and puts out 14.0v all the time. | ||
| The Morningstar charge controller is factory set to start Absorption at 14.4v.((i.e. Vabs == 14.4v)) | The Morningstar charge controller is factory set to start Absorption at 14.4v.((i.e. Vabs == 14.4v)) | ||
| - | The Xantrex charge controller has been configured by you to start Absorption at 14.7v.((i.e. Vabs == 14.7v)) | + | The Xantrex charge controller has been configured by you to start Absorption at 14.7v.((i.e. Vabs == 14.7v)) ((Normally the controllers would be set to the same voltage but we will make them different to illustrate how it works.)) |
| Let's charge that battery. | Let's charge that battery. | ||
electrical/12v/multipoint_charging.txt ยท Last modified: 2024/03/29 18:55 by frater_secessus
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
