User Tools

Site Tools


electrical:12v:self-jumpstarting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
electrical:12v:self-jumpstarting [2022/04/30 10:40]
frater_secessus [Self-jumpstarting]
electrical:12v:self-jumpstarting [2023/01/18 12:01]
frater_secessus [Self-jumpstarting]
Line 1: Line 1:
 ====== Self-jumpstarting ====== ====== Self-jumpstarting ======
  
-Self-jumpstarting means jumpstarting one's own vehicle without the use of another vehicle.  The most common way to do this is by [[electrical:12v:alternator|combining]] house and chassis batteries. +Self-jumpstarting means jumpstarting one's own vehicle without the use of another vehicle.  It's done by [[electrical:12v:alternator|combining]] house and chassis batteries by one of several methods discussed below
    
-Note:  regardless of specific method used, it will be gentlest on the system to combine the batteries and wait a short time for the starter battery to come up a bit instead of immediately attempting to start. This will minimize the amount of current flowing from house bank to vehicle chassis. +Note:  regardless of specific method used, it will be gentlest on the system to combine the batteries and wait for the starter battery to come up instead of immediately attempting to start. This will minimize the amount of current flowing from house bank to vehicle chassis. This may be especially important with Li chemistries that have BMS protections
  
 ===== jumping from the house bank ===== ===== jumping from the house bank =====
electrical/12v/self-jumpstarting.txt · Last modified: 2024/03/22 08:19 by frater_secessus