Differences

This shows you the differences between two versions of the page.

--- electrical:12v:voltage_sag [2022/03/16 14:03]
frater_secessus [calibration]
+++ electrical:12v:voltage_sag [2024/03/10 13:58] (current)
frater_secessus [networked shunt]
@@ Line 38: / Line 38: @@
 ==== adjust charging setpoints ====
+If your sag is consistent you could adjust your setpoints upwards.  If you have 0.2v sag and want 14.0v you would configure the setpoint to 14.2v.
+Or if your battery manufacturer offers a range of charging voltages like 14.0v - 14.4v you could configure 14.4v and know it will be ≤14.4v in real conditions.
@@ Line 49: / Line 51: @@
 Example:  The absorption setpoint (Vabs) is 14.0.  The sensed battery voltage is only 13.8v, so the controller actually puts out 14.2v.((or whatever it takes to get 14.0v at the battery))
-Some sense "wire" are wireless (https://amzn.to/3IbnnQg|[[Victron Smart Battery Sense]])
+Some sense "wire" are wireless ([[https://amzn.to/3IbnnQg|Victron Smart Battery Sense]])
@@ Line 57: / Line 59: @@
 Some controllers use networked [[electrical:12v:battery_monitor|battery monitors]] to report back what the battery voltage is in reality.
-Example:  [[https://amzn.to/3tiqlhu|Victron Lynx shunt]].  [[https://amzn.to/3qbfcNJ|Victron VEbus smart dongle]].  [[https://amzn.to/3ijF6u9|Victron BMV-712]].
+Examples:
+  * [[https://amzn.to/3tiqlhu|Victron Lynx shunt]]
+  * [[https://amzn.to/3qbfcNJ|Victron VEbus smart dongle]]
+  * [[https://amzn.to/3ijF6u9|Victron BMV-712]].

RV and vandwellers wiki