User Tools

Site Tools


electrical:12v:wiring

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
electrical:12v:wiring [2022/09/17 14:19]
frater_secessus [basic principles]
electrical:12v:wiring [2022/09/17 14:23]
frater_secessus [critical vs noncritical applications]
Line 26: Line 26:
   * battery bank to fuse panel   * battery bank to fuse panel
   * power distribution runs from one side of the van to the other (bus to bus)    * power distribution runs from one side of the van to the other (bus to bus) 
 +  * DC-DC charging of the house bank from alternator
 +  * sensitive electronics
  
 **Noncritical applications** can accept voltage sag of ≤10%.  With 10% sag 14.4v at the source drops to 13.0v at the other end of the wires.  Some noncritical applications might include: **Noncritical applications** can accept voltage sag of ≤10%.  With 10% sag 14.4v at the source drops to 13.0v at the other end of the wires.  Some noncritical applications might include:
  
-  * isolator charging of the +  * isolator charging of the house bank ([[electrical:12v:alternator#example|details]]), especially when some solar is present 
 +  * MaxxFan control boards are sensitive to overvoltage and may prefer some sag 
  
  
electrical/12v/wiring.txt · Last modified: 2022/09/17 14:25 by frater_secessus