RV and vandwellers wiki

User Tools

Site Tools

Trace:
electrical:batterycide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:batterycide [2018/06/30 20:58]
frater_secessus [murdering flooded lead-acid] 		electrical:batterycide [2019/05/17 22:15]
frater_secessus [murdering AGM]
Line 19: Line 19:
   * overvoltage   * overvoltage
     * Incorrect Absorption setpoints.  AGM is commonly Absorped at <= 14.4v while FLA is commonly Absorped higher (at 14.7v-14.8v).  Check your manufacturer's recommendation and do not exceed it.  Overvoltage causes irrepairable damage by outgassing, and AGM cannot be topped off again like FLA.     * Incorrect Absorption setpoints.  AGM is commonly Absorped at <= 14.4v while FLA is commonly Absorped higher (at 14.7v-14.8v).  Check your manufacturer's recommendation and do not exceed it.  Overvoltage causes irrepairable damage by outgassing, and AGM cannot be topped off again like FLA.
-    * Equalization. **Do not equalize AGM**!((lifeline excepted)).    +    * Equalization. **Do not equalize AGM**!((lifeline excepted)).   
 +  * Low current charging.  Cheap AGM require [[electrical:12v:battery_capacity|C/5]] current minimum in Bulk, and expensive ones require C/3.
   * the lead-acid list above   * the lead-acid list above
  
electrical/batterycide.txt · Last modified: 2023/08/24 22:52 by princess_fluffypants

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International

affilliate disclosure

CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki