User Tools

Site Tools


electrical:batterycide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:batterycide [2020/07/08 12:25]
frater_secessus
electrical:batterycide [2020/07/08 12:28]
frater_secessus [murdering lithium]
Line 33: Line 33:
  
  
-  * overvoltage.  [[electrical:12v:lifepo4_batteries_thread|13.8v is a safe upper limit]] and will charge the bank completely.  Some experienced folk use slightly higher voltages for faster charging but it must be terminated quickly as the bank approaches 100% state of charge.+  * overvoltage.  [[electrical:12v:lifepo4_batteries_thread|13.8v is a safe upper limit]] without BMS and will charge the bank completely.  Some experienced folk use slightly higher voltages for faster charging but it must be terminated quickly as the bank approaches 100% state of charge.  Exception:  Lithium banks with BMS typically overcharge intentionally to balance cells.  The overcharge is consumed by resistors and does not actually go into the cell.  
   * long periods of 100% state of charge;  cease all charging at 100% and only charge that high if you know some loads will be applied immediately.  Lithium chemistries do not care about partial state of charge so use that to your advantage.   * long periods of 100% state of charge;  cease all charging at 100% and only charge that high if you know some loads will be applied immediately.  Lithium chemistries do not care about partial state of charge so use that to your advantage.
   * exposure to high heat   * exposure to high heat
electrical/batterycide.txt ยท Last modified: 2023/08/24 22:52 by princess_fluffypants