User Tools
electrical:depth_of_discharge
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
electrical:depth_of_discharge [2023/08/17 21:28] frater_secessus [soft and firm charging] |
electrical:depth_of_discharge [2023/08/17 21:28] frater_secessus [soft and firm charging] |
||
|---|---|---|---|
| Line 36: | Line 36: | ||
| So while we can say with confidence that a 100Ah Li battery charged at 20A to 14.0v will be ~100% SoC, the same battery charged to 14.0v at 80A might only be at 75% SoC. And it **could get damagingly overcharged** if charged to 14.0v very gently at something like 5A.((the BMS cannot detect this scenario)) | So while we can say with confidence that a 100Ah Li battery charged at 20A to 14.0v will be ~100% SoC, the same battery charged to 14.0v at 80A might only be at 75% SoC. And it **could get damagingly overcharged** if charged to 14.0v very gently at something like 5A.((the BMS cannot detect this scenario)) | ||
| - | The amp counter will probably help here during charging although even it can be thrown off. | + | The amp counter will probably help here during charging although even it can be thrown off; see the battery monitor article for more on this. |
electrical/depth_of_discharge.txt ยท Last modified: 2023/08/17 21:36 by frater_secessus
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
