RV and vandwellers wiki

User Tools

Site Tools

Trace:
electrical:relay

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:relay [2018/01/11 14:55]
frater_secessus [normally open vs normally closed] 		electrical:relay [2018/01/11 14:55]
frater_secessus [Relays]
Line 4: Line 4:
 The most common relay campers are exposed to is the solenoid for [[electrical:12v:alternator|charging house batteries from the coach's alternator]].  When the vehicle is turned on power activates the solenoid and connects the house and vehicle electrical systems. The most common relay campers are exposed to is the solenoid for [[electrical:12v:alternator|charging house batteries from the coach's alternator]].  When the vehicle is turned on power activates the solenoid and connects the house and vehicle electrical systems.
 Relays are also useful for powering loads from [[electrical:12v:lvd|LVD]] or [[electrical:solar:charge_controller|Charge Controller]] LOAD outputs.  This allows powering larger loads than the controller is rated for.  Relays are also useful for powering loads from [[electrical:12v:lvd|LVD]] or [[electrical:solar:charge_controller|Charge Controller]] LOAD outputs.  This allows powering larger loads than the controller is rated for. 
 +
 +Common uses:
 +  * battery isolation when [[electrical:12v:alternator|alternator charging]]
 +  * [[electrical:12v:lvd|low voltage disconnect (LVD)]]
 +
 ===== normally open vs normally closed ===== ===== normally open vs normally closed =====
 Relays come in two basic types:   Relays come in two basic types:  
   - **Normally Open (NO)** - the output circuit is open/incomplete when the relay is resting.  No power flows.  The controlled device is **off** until the relay is triggered.  //This is usually the default.//     - **Normally Open (NO)** - the output circuit is open/incomplete when the relay is resting.  No power flows.  The controlled device is **off** until the relay is triggered.  //This is usually the default.//  
   - **Normally Closed (NC)** - the output circuit is closed/complete when the relay is resting.  Power flows.  The controlled device is **on** until the relay is triggered.   - **Normally Closed (NC)** - the output circuit is closed/complete when the relay is resting.  Power flows.  The controlled device is **on** until the relay is triggered.
- 
- 
 ===== latching relays ===== ===== latching relays =====
 Normally it takes power from the trigger source to operate the relay.  A latching relay, however, moves from position to position and locks there even when power is removed.  Normally it takes power from the trigger source to operate the relay.  A latching relay, however, moves from position to position and locks there even when power is removed. 
  
electrical/relay.txt ยท Last modified: 2020/10/11 19:48 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International

affilliate disclosure

CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki