Differences

This shows you the differences between two versions of the page.

--- electrical:severe_battery_use [2020/06/10 13:51]
frater_secessus [increasing effective Absorption duration]
+++ electrical:severe_battery_use [2020/07/08 12:38]
frater_secessus [increasing effective Absorption duration] eternal
@@ Line 30: / Line 30: @@
-  * if duration setpoint is maxxed then **set Vfloat == Vabs**.  Absorption duration will effectively be "until the sun goes down".
+  * if duration setpoint is maxxed then [[electrical:12v:eternal_absorption|set Vfloat == Vabs]].  Absorption duration will effectively be "until the sun goes down".
   * **charge at a lower current** (charging minimum).  While [[opinion:frater_secessus:charging_faster|overall charging will take about the same amount of time]], Bulk's share of that time will increase and [[electrical:12v:charging#absorption|Absorption will take somewhat less time]].
   * **charge at a higher voltage** (Vabs), this will decrease Absorption duration.  Keep a close watch on water levels for flooded batts, and also mind the max allowable voltage for AGM/Gel.

RV and vandwellers wiki