Differences

This shows you the differences between two versions of the page.

--- electrical:solar:charge_controller [2019/02/01 20:17]
frater_secessus [MPPT]
+++ electrical:solar:charge_controller [2019/04/11 19:49]
frater_secessus [shunt]
@@ Line 53: / Line 53: @@
 ==== shunt  ====
 [[http://amzn.to/2yQppTX|{{ https://images-na.ssl-images-amazon.com/images/I/41Gwyw0BT5L._AC_US160_.jpg}}]]
-Shunt controllers are very simple devices that charge to a given voltage [[electrical:solar:charge_controller_setpoints|setpoint]] (Vdisconnect) then stop charging.  If/when voltage falls to some lower voltage (Vreconnect) charging begins again.  This is sometimes called [[electrical:12v:charging#charge-and-stop|charge and stop charging]].
+Shunt controllers are very simple devices that charge to a given voltage [[electrical:solar:charge_controller_setpoints|setpoint]] (Vdisconnect) then stop charging.  If/when voltage falls to some lower voltage (Vreconnect) charging begins again.  This is sometimes called [[electrical:12v:charging#charge-and-stop|charge and stop charging]] or on/off charging.
 > ...PWM [and] shunt controllers apply full panel voltage, or something close to it, across the battery terminals, at a duty cycle (fast for PWM, slow for shunt) that keeps the battery happy, and the controller monitors the battery voltage and then adjusts the PWM duty cycle accordingly, or in the case of a shunt, it clamps the panel output. -- Tx2Sturgis((http://www.cheaprvliving.com/forums/showthread.php?tid=29896&pid=373640#pid373640))

RV and vandwellers wiki