User Tools

Site Tools


electrical:solar:charge_controller_setpoints

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:solar:charge_controller_setpoints [2020/10/18 12:36]
frater_secessus [non-setpoint settings]
electrical:solar:charge_controller_setpoints [2023/07/21 23:15] (current)
frater_secessus [charging setpoints]
Line 27: Line 27:
 Less common setpoints: Less common setpoints:
   * **Absorption duration** - the amount of time Vabs will be held until dropping to Vfloat.  May be used instead of or in addition to any endAmps above.  endAmps is more precise but can be tricky to measure, as [[electrical:12v:loads|loads]] or [[electrical:12v:multipoint_charging|multiple controllers]] can obscure the true level of current being accepted by the battery.   * **Absorption duration** - the amount of time Vabs will be held until dropping to Vfloat.  May be used instead of or in addition to any endAmps above.  endAmps is more precise but can be tricky to measure, as [[electrical:12v:loads|loads]] or [[electrical:12v:multipoint_charging|multiple controllers]] can obscure the true level of current being accepted by the battery.
-  * **Absorption restart** - voltage (or duration) at which Absorption stage after failing to maintain Vfloat+  * **Absorption restart** - voltage (or duration) at which Absorption stage after failing to maintain Vfloat.  Sometimes called //rebulk// or //reboost//.
   * **Equalization duration** - the amount of time the controller will hold Vequal.   * **Equalization duration** - the amount of time the controller will hold Vequal.
   * **Equalization frequency** - the number of days between equalization.  30 days is typical.    * **Equalization frequency** - the number of days between equalization.  30 days is typical. 
electrical/solar/charge_controller_setpoints.txt ยท Last modified: 2023/07/21 23:15 by frater_secessus