electrical:solar:gentle_intro
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
electrical:solar:gentle_intro [2018/10/17 11:39] frater_secessus [A gentle introduction to solar] |
electrical:solar:gentle_intro [2018/10/17 11:42] frater_secessus [panels] |
100W panels are usually nominal 12v; [[electrical:solar:panels#panel_voltage|there are also 20v and 24v panels]] one can source from the solar grid-tied market. The higher voltages panels require a MPPT controller (see below) but tend to be cheaper per watt. | 100W panels are usually nominal 12v; [[electrical:solar:panels#panel_voltage|there are also 20v and 24v panels]] one can source from the solar grid-tied market. The higher voltages panels require a MPPT controller (see below) but tend to be cheaper per watt. |
| |
The two main types of panel in 2018 are **monocrystalline** (//mono//) and **polycrystalline** (//poly//). The technical details are unimportant but you will see panels described as mono or poly when you are researching. Because of a quirk of voltage output their behavior, **poly panels are slightly better suited to PWM charge controllers**, and **mono panels((and "high voltage" 20v/24v panels)) are slightly better suited to MPPT controllers**. These controllers are discussed next. | The two main types of panel in 2018 are **monocrystalline** (//mono//) and **polycrystalline** (//poly//). The technical details are unimportant but you will see panels described as mono or poly when you are researching. Due to relatively small differences in their voltages, **poly panels are slightly better suited to PWM charge controllers**, and **mono panels((and "high voltage" 20v/24v panels)) are slightly better suited to MPPT controllers**. These controllers are discussed next. |
==== charge controller ==== | ==== charge controller ==== |
| |
electrical/solar/gentle_intro.txt ยท Last modified: 2023/11/07 11:19 by frater_secessus