User Tools

Site Tools


electrical:solar:mppt_design

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:solar:mppt_design [2018/11/20 10:34]
frater_secessus [input voltage]
electrical:solar:mppt_design [2020/04/10 09:44] (current)
frater_secessus [input voltage]
Line 14: Line 14:
   * Genasun (nominal 12 systems): ​ 15-18v for constant power supplies((https://​genasun.com/​support/​faq/​)),​ <= 27v for PV.((https://​www.bruceschwab.com/​wp-content/​uploads/​sites/​86/​2018/​01/​GV-10_Manual-2017.pdf))   * Genasun (nominal 12 systems): ​ 15-18v for constant power supplies((https://​genasun.com/​support/​faq/​)),​ <= 27v for PV.((https://​www.bruceschwab.com/​wp-content/​uploads/​sites/​86/​2018/​01/​GV-10_Manual-2017.pdf))
   * SNA (grid tied): Vpanel = desired output * 1.4142((https://​www.researchgate.net/​profile/​Aalok_Bhatt/​post/​How_to_select_MPPT_Range_of_Solar_Inverter/​attachment/​59d624496cda7b8083a1f834/​AS%3A377507284045824%401467016158673/​download/​SMA+Datasheet.pdf))   * SNA (grid tied): Vpanel = desired output * 1.4142((https://​www.researchgate.net/​profile/​Aalok_Bhatt/​post/​How_to_select_MPPT_Range_of_Solar_Inverter/​attachment/​59d624496cda7b8083a1f834/​AS%3A377507284045824%401467016158673/​download/​SMA+Datasheet.pdf))
-  * generic rule of thumb: ​ Vpanel >= maxiumum Vbatt + 30%  FIXME +  * generic rule of thumb: ​ Vpanel >= maxiumum Vbatt + 30%  
-  * generic rule of thumb: ​ Vpanel <= maximum ​Vbat * 2.((https://​www.homepower.com/​input-voltage-controller-efficiency))((https://​forum.solar-electric.com/​discussion/​351037/​recomended-mppt-input-voltage-for-a-48-volt-system)). ​+  * generic rule of thumb: ​ Vpanel <= maximum ​Vbatt * 2.((https://​www.homepower.com/​input-voltage-controller-efficiency))((https://​forum.solar-electric.com/​discussion/​351037/​recomended-mppt-input-voltage-for-a-48-volt-system)). ​
  
electrical/solar/mppt_design.txt · Last modified: 2020/04/10 09:44 by frater_secessus