User Tools

Site Tools


electrical:solar:nonessential

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:nonessential [2020/01/13 11:26]
frater_secessus [when to run opportunity loads]
electrical:solar:nonessential [2020/01/13 11:34]
frater_secessus [opportunity loads]
Line 5: Line 5:
 In practice, actual loads may be heavier in the daytime (as when working with power tools) or at night (as when watching movies or running a forced-air furnace).   In practice, actual loads may be heavier in the daytime (as when working with power tools) or at night (as when watching movies or running a forced-air furnace).  
  
-Due to the nature of battery charging there are better times and worse times to run non-essential loads.  If done attentively (or automatically) **one can run electrical loads that do not affect the battery's  +If loads are applied attentively (or automatically!) **one can run electrical loads that [[electrical:solar:offthepanel|do not affect]] the battery bank's  
-[[electrical:depth_of_discharge|State of Charge]]** at all.  This is especially true for Lead-Acid chemistries that do not take much current in [[electrical:12v:charging|Float or late Absorption stages]].+[[electrical:depth_of_discharge|State of Charge]]** at all.  Additionally, consuming loads at the right time can also increase the health and longevity of lead batteries.((by keeping them at 100% SoC more of the time))
  
 ===== how much surplus current is there? ===== ===== how much surplus current is there? =====
electrical/solar/nonessential.txt · Last modified: 2023/10/18 19:08 by frater_secessus