User Tools

Site Tools


electrical:solar:output

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:output [2020/01/22 10:10]
frater_secessus [Factors affecting solar panel output]
electrical:solar:output [2020/01/22 10:15]
frater_secessus [charge controller type]
Line 14: Line 14:
 [[electrical:solar:charge_controller#mppt|MPPT]] controllers can run the panel at max output when needed, but are much more expensive.  [[electrical:solar:charge_controller#mppt|MPPT]] controllers can run the panel at max output when needed, but are much more expensive. 
  
 +===== wiring losses =====
 +
 +Long runs of wire between the panel and controller can result in losses that make the panel //appear// to be putting out less power.   In reality, the lost power has been converted to heat((from resistance)) in the wiring.  Solutions:
 +
 +  * use shorter runs
 +  * use thicker wire
 +  * prefer [[electrical:solar:panels#panel_voltage|higher voltage panels]]
 +  * if multiple panels, run them in serial instead of parallel to decrease carried current
  
 ===== panel temperature ===== ===== panel temperature =====
electrical/solar/output.txt ยท Last modified: 2024/02/21 11:49 by frater_secessus