User Tools

Site Tools


electrical:solar:output

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:output [2020/05/17 19:43]
frater_secessus [panel tilt]
electrical:solar:output [2020/05/17 19:45]
frater_secessus [panel tilt]
Line 111: Line 111:
 **Optimum aiming** involves both tracking the suns elevation above the horizon (zenith) and tracking the sun's east-to-west travel (azimuth).  Doing both can increase yield ~30% but requires frequent repositioning. **Optimum aiming** involves both tracking the suns elevation above the horizon (zenith) and tracking the sun's east-to-west travel (azimuth).  Doing both can increase yield ~30% but requires frequent repositioning.
  
-**Leaving panel tilt in a reasonable default** is more common and has milder yield improvments.  In this approach the panel is aimed at true((not magnetic)) south((in the northern hemisphere)) at a particular angle above the horizon depending on time of year and latitude.+**Leaving panel tilt in a reasonable default** is more common and has milder yield improvments.  In this approach the panel is aimed at true((not magnetic)) south((in the northern hemisphere)) at a particular angle from perpendicular((ie, flat panel)) depending on time of year and latitude.
  
 Tilt angles calculated by [[https://www.solarpaneltilt.com/|solarpaneltilt.com]]: Tilt angles calculated by [[https://www.solarpaneltilt.com/|solarpaneltilt.com]]:
electrical/solar/output.txt ยท Last modified: 2024/02/21 11:49 by frater_secessus