User Tools

Site Tools


electrical:solar:panel-bank_ratio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
electrical:solar:panel-bank_ratio [2018/07/27 10:13]
frater_secessus [Panel:Bank ratio]
electrical:solar:panel-bank_ratio [2020/06/24 21:05]
frater_secessus [1:2 underpaneling]
Line 19: Line 19:
   * the battery bank is [[electrical:12v:deep_cycle_battery#lithium_chemistries|lithium]] or some other chemistry unaffected by [[electrical:12v:psoc|partial state of charge]].   * the battery bank is [[electrical:12v:deep_cycle_battery#lithium_chemistries|lithium]] or some other chemistry unaffected by [[electrical:12v:psoc|partial state of charge]].
 Outside the above configurations, underpaneling can contribute to [[electrical:batterycide|battery murder]]. Outside the above configurations, underpaneling can contribute to [[electrical:batterycide|battery murder]].
 +
 +===== battery health =====
 +
 +Different battery types have different charging requirements:
 +
 +  * lithium - no minimum, charge at any rate up to the max
 +  * flooded lead-acid:  minimum [[electrical:12v:battery_capacity|C]]/10 (10A per 100ah of capacity)
 +    * minimum ratio with MPPT = 1.25w:1ah
 +    * minimum ratio with MPPT = 1.5w:1ah((1.44w:1ah, actually))
 +  * AGM lead-acid:  minimum [[electrical:12v:battery_capacity|C]]/5 (20A per 100ah of capacity)
 +    * minimum ratio with MPPT = 2.5w:1ah
 +    * minimum ratio with MPPT = 3w:1ah((2.88w:1Ah))
  
electrical/solar/panel-bank_ratio.txt ยท Last modified: 2023/10/22 10:45 by frater_secessus