User Tools

Site Tools


electrical:solar:shallow_cycling

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
electrical:solar:shallow_cycling [2020/07/08 15:40]
frater_secessus [sample build]
electrical:solar:shallow_cycling [2020/07/08 15:48]
frater_secessus [staged charging]
Line 21: Line 21:
 ==== how it works ==== ==== how it works ====
  
-  - a simple [[electrical:solar:charge_controller#shunt|shunt charge controller]] holds the battery at a mild Absorption voltage (14.0, - 14.2v) when charging, just below the significant gassing point+  - a simple [[electrical:solar:charge_controller#shunt|shunt charge controller]] holds the battery at a mild Absorption voltage (14.0, - 14.2v, see notes [[electrical:solar:shallow_cycling#charging_voltages_and_starter_batteries|below]]) when charging, just below the significant gassing point
   - the controller's LOAD output disconnects (LVD) at 100% SoC (~12.7v)   - the controller's LOAD output disconnects (LVD) at 100% SoC (~12.7v)
   - the controller's LOAD output //re//connects (LVR) at ~13.0v);  see discussion below   - the controller's LOAD output //re//connects (LVR) at ~13.0v);  see discussion below
Line 105: Line 105:
   * 13.6v Float    * 13.6v Float 
  
-So a smart charger fitting that profile should be gentle enough on the battery.+So a charge controller with that configuration should be gentle enough on the battery.
  
  
electrical/solar/shallow_cycling.txt ยท Last modified: 2023/04/08 13:41 by frater_secessus