User Tools

Site Tools


electrical:solar:shallow_cycling

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
electrical:solar:shallow_cycling [2018/06/16 17:54]
frater_secessus [how it works]
electrical:solar:shallow_cycling [2018/07/10 08:32] (current)
frater_secessus [how it works]
Line 19: Line 19:
   - the controller'​s LOAD output disconnects (LVD) at 100% SoC (~12.7v)   - the controller'​s LOAD output disconnects (LVD) at 100% SoC (~12.7v)
   - the controller'​s LOAD output //​re//​connects (LVR) at ~13.0v); ​ see discussion below   - the controller'​s LOAD output //​re//​connects (LVR) at ~13.0v); ​ see discussion below
-  - power is //only// taken from the controller'​s LOAD output;((or from a circuit control by a relay on the LOAD output)) this ensures the starter battery is never discharged below the intended setpoint+  - power is //only// taken from the controller'​s LOAD output;((or from a circuit control by a relay on the LOAD output)) this ensures the starter battery is never discharged below [[electrical:​12v:​lvd|the intended setpoint]]
  
 === Low Voltage Reconnect (LVR) setpoint === === Low Voltage Reconnect (LVR) setpoint ===
electrical/solar/shallow_cycling.txt ยท Last modified: 2018/07/10 08:32 by frater_secessus