electrical:solar:shunt_tweaking
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
|
electrical:solar:shunt_tweaking [2020/10/11 19:48] 127.0.0.1 external edit |
electrical:solar:shunt_tweaking [2021/05/22 10:27] (current) frater_secessus |
Note: this article was written by secessus about the [[http://amzn.to/2mU84Hi|type of controller seen on the right]]. They are called CMTD among other names. ] | Note: this article was written by secessus about the [[http://amzn.to/2mU84Hi|type of controller seen on the right]]. They are called CMTD among other names. ] |
| |
A configurable [[electrical:solar:charge_controller#shunt|shunt controller]] can be a very good deal, sometimes less than $10 shipped. While they share the same lower-yield issues with PWM and for the same reason((Vpanel == Vbatt)) they can be tweaked for better performance. | A configurable [[electrical:solar:charge_controller#shunt|shunt]] (single stage) controller can be a very good deal, sometimes less than $10 shipped. While they share the same lower-yield issues with PWM and for the same reason((Vpanel == Vbatt)) they can be tweaked for better performance. |
| |
There are three [[electrical:solar:charge_controller_setpoints|setpoints]] that interest us: charging setpoint, low voltage disconnect, and low voltage reconnect. | There are three [[electrical:solar:charge_controller_setpoints|setpoints]] that interest us: charging setpoint, low voltage disconnect, and low voltage reconnect. |
electrical/solar/shunt_tweaking.1602460085.txt.gz ยท Last modified: 2020/10/11 19:48 by 127.0.0.1