User Tools
opinion:frater_secessus:lifepo4_charging_voltage
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
opinion:frater_secessus:lifepo4_charging_voltage [2023/08/30 23:40] frater_secessus [the full process] |
opinion:frater_secessus:lifepo4_charging_voltage [2024/02/10 11:33] (current) frater_secessus [the full process13.6v example |
||
|---|---|---|---|
| Line 38: | Line 38: | ||
| * ≥14.0v will charge to ~100% SoC with zero minutes of absorption durations: hit the voltage setpoint and //stop//. Cell voltages tend to diverge as charging voltage increases above 14.0v because they are further up the knee (see below) | * ≥14.0v will charge to ~100% SoC with zero minutes of absorption durations: hit the voltage setpoint and //stop//. Cell voltages tend to diverge as charging voltage increases above 14.0v because they are further up the knee (see below) | ||
| * 13.8v will charge to ~100% SoC with a small amount of Absorption (10-30 minutes?) and cells tend to stay in balance. | * 13.8v will charge to ~100% SoC with a small amount of Absorption (10-30 minutes?) and cells tend to stay in balance. | ||
| - | * 13.6v will charge to ~100% SoC with several hours of Absorption | + | * 13.6v will charge to ~100% SoC with several hours of Absorption |
opinion/frater_secessus/lifepo4_charging_voltage.1693453243.txt.gz · Last modified: 2023/08/30 23:40 by frater_secessus
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
