User Tools

Site Tools


opinion:frater_secessus:self-heated_lifepo4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
opinion:frater_secessus:self-heated_lifepo4 [2023/09/03 16:24]
frater_secessus [how to think about the decision]
opinion:frater_secessus:self-heated_lifepo4 [2023/10/17 15:13] (current)
frater_secessus [how the approaches work]
Line 18: Line 18:
   - allow incoming power only to the internal heaters, typically ~60w   - allow incoming power only to the internal heaters, typically ~60w
   - when cell temps are >freezing charging is re-enabled   - when cell temps are >freezing charging is re-enabled
-  - optional:  heating may continue until some warmer setpoint, typically ~50F when this feature is utilized+  - optional:  heating may continue until some warmer setpoint is reached, typically 40F-50F when this feature is utilized
  
 This means //warming only happens when charging is present// This may or may not be what you want.  This means //warming only happens when charging is present// This may or may not be what you want. 
Line 34: Line 34:
  
  
-With "soft" charging like a small solar setup it's a wash.  a matter of preference and cost.    +With "soft" charging like a small solar setup it's a wash.  a matter of preference and cost.   But in some specific use cases one approach might work better. 
- +
-In some specific use cases one approach might be better-suited than the other +
  
  
opinion/frater_secessus/self-heated_lifepo4.1693772697.txt.gz · Last modified: 2023/09/03 16:24 by frater_secessus