User Tools

Site Tools


opinion:frater_secessus:solar_not_charging

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
opinion:frater_secessus:solar_not_charging [2023/09/04 19:01]
frater_secessus [because the BMS has shut down charging]
opinion:frater_secessus:solar_not_charging [2023/09/04 20:26] (current)
frater_secessus [charge-and-stop]
Line 6: Line 6:
   - up to its abilities under present conditions   - up to its abilities under present conditions
  
-So why does it not make power sometimes?+In most cases the system is working as designed but the owner doesn't know it.  
  
  
Line 17: Line 17:
  
  
 +==== charge-and-stop ====
  
 +Charge-and-stop usually charges to 14.2v or 14.4v then stops until nank voltage drops to 13.2v before restarting Bulk charging. This occurs because charge-and-stop does not use a Float setpoint.((Li doesn't need Floating in the lead-acid sense, but [[opinion:frater_secessus:electrical:12v:drop-in_lifepo4#mythyou_shouldn_t_float_lithium|it can still be useful]].))  
 +
 +Under very light loads this would result in cycling between 90% and 100% state of charge.  Because of [[electrical:12v:voltage_sag|voltage sag]] heavy loads might result in cycling between 95% - 100%.  
 +
 +If this is undesirable behavior you can set up a USER profile with whatever setpoints you wish ([[electrical:12v:drop-in_lifepo4#mythyou_can_t_charge_li_with_a_lead_battery_charger|suggested settings]]).
 ===== because the panels aren't receiving full sunlight ===== ===== because the panels aren't receiving full sunlight =====
  
opinion/frater_secessus/solar_not_charging.1693868517.txt.gz · Last modified: 2023/09/04 19:01 by frater_secessus