Differences

This shows you the differences between two versions of the page.

--- opinion:frater_secessus:solar_not_charging [2023/09/04 20:24]
frater_secessus [because no power is being demanded]
+++ opinion:frater_secessus:solar_not_charging [2023/09/04 20:26] (current)
frater_secessus [charge-and-stop]
@@ Line 19: / Line 19: @@
 ==== charge-and-stop ====
-Charge-and-stop usually charges to 14.2v or 14.4v then stops until nank voltage drops to 13.2v before restarting Bulk charging.
+Charge-and-stop usually charges to 14.2v or 14.4v then stops until nank voltage drops to 13.2v before restarting Bulk charging. This occurs because charge-and-stop does not use a Float setpoint.((Li doesn't need Floating in the lead-acid sense, but [[opinion:frater_secessus:electrical:12v:drop-in_lifepo4#mythyou_shouldn_t_float_lithium|it can still be useful]].))
 Under very light loads this would result in cycling between 90% and 100% state of charge.  Because of [[electrical:12v:voltage_sag|voltage sag]] heavy loads might result in cycling between 95% - 100%.

RV and vandwellers wiki