Differences

This shows you the differences between two versions of the page.

--- rv:build:steps [2019/03/27 09:15]
frater_secessus [downsizing]
+++ rv:build:steps [2019/03/27 09:43]
frater_secessus [floor]
@@ Line 32: / Line 32: @@
 ===== mocking up =====
-    - sit in the space, or measure the space and mark it out in an unused room
+  * Mark out a space on the floor to represent your van's living space.  A corner may work best, so you can also mark the interior height on two walls.  [[https://amzn.to/2UcGSmv|Blue painter's tape]] will remove easily and without damage when you move into your van.
-    - use actual gear or cardboard mockups as placeholders to help you understand the layout
+  * place your belongings in their actual locations in the "van".
+  * use cardboard boxes to represent items you haven't sourced yet (bed, refrigerator, etc)
+  * This experience tends to be one of the first OMG moments: the physical constraints become very real.  The upside is it may be encouragement to get rid of stuff faster!
 ===== roof =====
@@ Line 48: / Line 49: @@
     - cut any needed holes for vents, drains, etc
-  - **body modification** - cut any holes for water entry, shore power connectors, etc.  Note:  traditionally **hookups go on the driver's side of the camper**.
+  - **body modification** - cut any holes for water entry, [[electrical:shore_power|shore power]] connectors, etc.  Note:  traditionally **hookups go on the driver's side of the camper**.
 ===== acoustic dampening =====

RV and vandwellers wiki