electrical:12v:alternator
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
electrical:12v:alternator [2021/06/25 13:23] frater_secessus [voltage-sensing relays] |
electrical:12v:alternator [2021/06/25 13:32] frater_secessus [voltage-sensing relays] |
| |
- [[http://amzn.to/2h2tDxp|single voltage sensing]] - this type reads the voltage of only one battery. In the case of an RV it would read the voltage of the starting battery. When it is high enough above resting voltage (ie, being charged by alternator) it connects the starting and house batteries. \\ [secessus says: "IMO the practical benefit (if any) to charging the starter battery "first" is keeping the load on the alternator reasonable. In practice, the isolator generally connects the two within a few seconds."] \\ Examples: [[http://amzn.to/2h2tDxp|Sure Power 1314]], [[https://amzn.to/2tEGp1e|BlueSea BatteryLink]], [[https://amzn.to/2Ri2jQV|Battery Doctor]], [[https://amzn.to/3h5iMUd|Victgron CT]]. | - [[http://amzn.to/2h2tDxp|single voltage sensing]] - this type reads the voltage of only one battery. In the case of an RV it would read the voltage of the starting battery. When it is high enough above resting voltage (ie, being charged by alternator) it connects the starting and house batteries. \\ [secessus says: "IMO the practical benefit (if any) to charging the starter battery "first" is keeping the load on the alternator reasonable. In practice, the isolator generally connects the two within a few seconds."] \\ Examples: [[http://amzn.to/2h2tDxp|Sure Power 1314]], [[https://amzn.to/2tEGp1e|BlueSea BatteryLink]], [[https://amzn.to/2Ri2jQV|Battery Doctor]], [[https://amzn.to/3h5iMUd|Victgron CT]]. |
- [[http://amzn.to/2gVmLFU|dual voltage sensing]] - this type reads the voltage from //both// sides and when either is high enough it connects the batteries. This may or [[electrical:12v:alternator_charging_hvd|may not be what an RVer wants]] \\ Examples: [[http://amzn.to/2gVmLFU|Sure Power 1315]], [[https://amzn.to/37gcdIv|BlueSea SI-ACR]], [[https://amzn.to/2RFaXI7|JayCorp Smart Dual Battery 140A Isolator]]((bonus points to the Jaycorp for printing the connect/disconnect setpoints right on the isolator!)) | - [[http://amzn.to/2gVmLFU|dual voltage sensing]] - this type reads the voltage from //both// sides and when either is high enough it connects the batteries. This may or [[electrical:12v:alternator_charging_hvd|may not be what an RVer wants]] \\ Examples: [[http://amzn.to/2gVmLFU|Sure Power 1315]], [[https://amzn.to/37gcdIv|BlueSea SI-ACR]], [[https://amzn.to/2RFaXI7|JayCorp Smart Dual Battery 140A Isolator]]((bonus points to the Jaycorp for printing the connect/disconnect setpoints right on the isolator!)), Precision Circuits BIM((also see Li-BIM below)) |
- DC-DC isolators (aka //[[electrical:12v:b2b|b2b]] isolators//) that boost alternator voltage to [[electrical:12v:charging|more appropriate levels for lead chemistries]] and can do multistage charging. These have [[electrical:12v:b2b|their own page]]. | - DC-DC isolators (aka //[[electrical:12v:b2b|b2b]] isolators//) that boost alternator voltage to [[electrical:12v:charging|more appropriate levels for lead chemistries]] and can do multistage charging. These have [[electrical:12v:b2b|their own page]]. |
| |
electrical/12v/alternator.txt ยท Last modified: 2024/06/13 11:53 by frater_secessus