Differences

This shows you the differences between two versions of the page.

--- electrical:12v:voltage_sag [2022/03/16 14:00]
frater_secessus [voltage sense wire]
+++ electrical:12v:voltage_sag [2022/03/16 14:03]
frater_secessus [calibration]
@@ Line 64: / Line 64: @@
 ==== calibration ====
+The controller may also have a **voltage calibration** setpoint.  If your sag is consistently -0.2v you could input that calibration.  You put in 14.0v or whatever you want and the controller increases voltage by 0.2v.
+Unfortunately, sag varies with current so the user might need to figure out average sag in their use case.
-    have a voltage calibration setting - sag varies with current so the user might need to figure out average sag in their use case.

RV and vandwellers wiki