Differences

This shows you the differences between two versions of the page.

--- electrical:solar:charge_controller [2023/09/06 12:23]
frater_secessus [MPPT]
+++ electrical:solar:charge_controller [2023/09/10 13:51]
frater_secessus [present use]
@@ Line 244: / Line 244: @@
 ==== present use ====
-In practice the LOAD terminals typically are either ignored((some well-respected controllers don't have them anymore)) or used as [[electrical:12v:lvd|low voltage disconnects]] power relays (see below).
+In practice the LOAD terminals typically are either ignored((some well-respected controllers don't have them anymore)) or used as [[electrical:12v:lvd|low voltage disconnect]] power relays.  You can define Low Voltage Disconnect (LVD) and Low Voltage Reconnect (LVR) [[electrical:solar:charge_controller_setpoints|setpoints]]  to protect the battery from excessive discharge.
-One benefit to doing this is you can define a [[electrical:12v:lvd|Low Voltage Disconnect]] (LVD) setpoint and Low Voltage Reconnect to protect the battery from excessive discharge:
 ==== why loads aren't powered from LOAD terminals ====

RV and vandwellers wiki