This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
electrical:solar:charge_controller [2023/12/13 10:36] frater_secessus [specs] |
electrical:solar:charge_controller [2024/06/01 22:01] frater_secessus [sensors] |
||
---|---|---|---|
Line 25: | Line 25: | ||
Cautionary example: | Cautionary example: | ||
+ | ==== sensors ==== | ||
+ | |||
+ | To charge correctly the controller needs to know the precise voltage and temperature of the battery bank. | ||
+ | In the best case scenario these measurements are done with an external **temp sensor** and **voltage sense**((not a typo, it's called voltage sense)) that plug into the controller or talk to the controller via bluetooth. | ||
+ | |||
+ | In the absence of external sensors the controller tries to use any internal sensors it might have. The values will be inaccurate: | ||
+ | |||
+ | * battery voltage will read [[electrical: | ||
+ | * temperature will read falsely high because of the heat the controller generates from its own electronics | ||
+ | |||
+ | With **lead-chemistry batteries** both conditions can cause [[electrical: | ||
+ | |||
+ | |||
+ | |||
+ | |||
===== specs ===== | ===== specs ===== | ||
Line 32: | Line 47: | ||
* **12v/ | * **12v/ | ||
* **Maximum input voltage** - the highest voltage the controller should //ever// see from the solar array.((it is common to leave ~20% margin)) | * **Maximum input voltage** - the highest voltage the controller should //ever// see from the solar array.((it is common to leave ~20% margin)) | ||
+ | * **Minimum input voltage** - a PWM controller will requires panel voltage ≥ battery voltage to charge. | ||
Line 197: | Line 212: | ||
**MPPT is effectively required** when: | **MPPT is effectively required** when: | ||
* when one needs to squeeze every watt out of the panel | * when one needs to squeeze every watt out of the panel | ||
- | * using panels with nominal voltages higher than the battery bank voltage, like 24v panels with a 12v bank. To be fair, [[http:// | + | * using panels with nominal voltages higher than the battery bank voltage, like 24v panels with a 12v bank. To be fair, [[http:// |
* space available for panels is limited, as on a sailboat or small vehicle | * space available for panels is limited, as on a sailboat or small vehicle | ||
* daytime loads are hampered by [[electrical: | * daytime loads are hampered by [[electrical: |