Differences

This shows you the differences between two versions of the page.

--- electrical:solar:status [2023/09/22 11:43]
frater_secessus [setups with no float]
+++ electrical:solar:status [2023/11/19 17:16]
frater_secessus [setups with no float]
@@ Line 126: / Line 126: @@
 Configurations with no float ("charge and stop", found on some Lithium profiles) will
-  - charge to the Absorption ("boost") setpoint
+  - charge to the Absorption ("boost") setpoint((with or without some amount of Absorption duration))
   - **stop charging**
-  - until voltage falls to the rebulk ("reboost", "boost return voltage") setpoint, typically 13.2v
+  - until voltage falls to the rebulk ("reboost", "boost return voltage") setpoint
   - repeat
@@ Line 135: / Line 135: @@
 === Renogy confusion ===
-By default Renogy Li profiles work this way, and cause much concern for Renogy users who have not read their manuals and/or who do not understand how solar charge controllers / chargers work. [The required information is present [[https://www.renogy.com/support/downloads|in the manuals]] but Renogy should spell it out for first-timers. -- secessus]
+By default Renogy Li profiles work this way, and cause much concern for Renogy users who have not read their manuals and/or who are not familiar with how solar charge controllers / chargers work. [The required information is present [[https://www.renogy.com/support/downloads|in the manuals]] but Renogy really should spell it out for first-timers. -- secessus]
   * **Rover series** - the table on page 37 of [[https://www.renogy.com/content/RNG-CTRL-RVR40/RVR203040-Manual.pdf|the manual]] shows there is no boost duration and no float in the Li profile.  The "boost return voltage" field shows **13.2v**.

RV and vandwellers wiki

User Tools

Site Tools

Differences

Page Tools