User Tools

Site Tools


opinion:frater_secessus:lifepo4_charging_voltage

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
opinion:frater_secessus:lifepo4_charging_voltage [2023/07/22 00:08]
frater_secessus [Problems caused by lithium charging profiles] read on
opinion:frater_secessus:lifepo4_charging_voltage [2023/07/22 00:09]
frater_secessus [lack of pseudo-float]
Line 67: Line 67:
 This can be intentional behavior, caused by a Li profile that  This can be intentional behavior, caused by a Li profile that 
  
-charges to a high voltage (see above) +  - charges to a high voltage (see above) 
-then allows the battery to discharge until it hits the [[electrical:solar:charge_controller_setpoints|Rebulk setpoint]]... +  then allows the battery to discharge until it hits the [[electrical:solar:charge_controller_setpoints|Rebulk setpoint]]... 
-at which point it charges to the high voltage again+  at which point it charges to the high voltage again... 
 +  - rinse and repeat until the sun goes down
  
 During the discharge stage the controller will appear to stop working.  In reality it's waiting to hit that rebulk setpoint to start the party again.   During the discharge stage the controller will appear to stop working.  In reality it's waiting to hit that rebulk setpoint to start the party again.  
opinion/frater_secessus/lifepo4_charging_voltage.txt · Last modified: 2024/02/10 11:33 by frater_secessus